Release Notes Follow

JumpStock Update - May 4th, 2023

Fixes

• Labels: Corrected sizing issue affecting any labels where the horizontal and vertical pitch did not equal the width and height of the label

Enhancements

• Labels: Added label format for Shamrock MSL-4FLAT-PB-2

 

JumpStock Update - December 15th, 2022

Fixes

• PAR Uploader: Fixed an issue that was not allowing data to be uploaded when a mapped header column was changed. (#136)
• Item Delete: Corrected an issue where items were not allowed to be deleted from a location due to the item being on a Voided or Deleted purchase order. (#138)
• Print Order: Made an update to the Print Order logic to be compatible with latest Chrome browser update. 

 

JumpStock Update - August 4th, 2022

Fixes

• Mobile Receiving (iOS only): Fixed an issue that was allowing a received quantity to be entered greater than the maximum value of nine digits. (#124)
• Currency Precision: Fixed an issue where loss of precision could occur when item unit costs were extremely large or when several decimal places were used. (#123)

 

Enhancements

• Meditech Requisition Integration: Updated this interface to pass through the inventory location from JumpStock based on the Ship To Location Name field in the Vendor Ship-To configuration.

 

JumpStock Update - May 26th, 2022

Fixes

• Vendor Viewed Email Notification: Fixed an issue where only the Custom Purchase Order Number was appearing in the email notification. Logic was added to use the system Purchase Order Number in the absence of a Custom Purchase Order Number. (#121)

 

New Features 

• Meditech Patient Charge Calculation: Meditech customers can now upload a markup file for patient charges to be calculated against and included in the DFT message. The markup file allows for more accurate charges by looking up each item by category and allowing for calculations by dollars or percentage within specified effective dates.

 

Enhancements

• Item Master Importer v2.1: Support for new Meditech Patient Charge Calculation including an additional column for CHARGE_CATEGORY.

 

 

JumpStock Update - March 31st, 2022

Fixes

• Custom Fields: Fixed an issue where multiple label configurations were being allowed for the Custom 1, Custom 2, and Custom 3 fields. (#93)

• Meditech Requisitions: Corrected an intermittent issue where JumpStock was generating a Meditech requisition file with an invalid requisition type of 'ERR'. (#103)

 

New Features 

(Note: The following features require special licensing as well as an Item Master integration) 

• Mobile Inventory Put-Away Module: This module allows users to update the quantity on hand for an item by scanning package labels containing GS1 and HIBC barcodes. Scanning these barcodes will automatically record the lot and expiration for each item allowing for more visibility into expiring items. In addition, this module also supports the receiving of non-purchase order items.

• Mobile Inventory Count Module: Tracking quantities by lot and expiration dates for high value items is critical to the financial health of a hospital. With the addition of this module, inventory can be tracked more easily at the lot level by scanning package labels containing GS1 and HIBC barcodes. Whereas the Inventory Put-Away module provides a simple way to add newly delivered quantities to your inventory, the Inventory Count module makes it easier to count items on the shelf, track lots and automatically calculate consumption.

 

Mobile Application Update 

 

JumpStock Android 1.15.0

• Added new Mobile Inventory Put-Away module

• Added new Mobile Inventory Count module

• Support for scanning GS1 barcodes

• Support for scanning HIBCC barcodes

 

 

JumpStock iOS 2.7.0

• Improved iOS 15 compatibility

 

JumpStock Update - August 19th, 2021

Fixes

• Item Master Importer: Fixed an issue where items with a single unit of measure in the packaging string was resulting in a parsing error
• Image Uploads: Resolved an issue where certain users were unable to upload item images (Issue: 110)
• User Management: Fixed an issue where password changes were not saving from within the Super Customer Administration screen (Issue: 109)
• User Authentication: Server-side support for mobile application fixes

 

 

Mobile Application Update (Target: August 23rd)

 

JumpStock Android 1.13.0

• Revised the login functionality to allow users to use multiple devices (Issue: 105)
• Resolved an issue where certain users were unable to upload item images (Issue: 110)
• Corrected an issue where external user configuration was causing an error upon logging in

 

JumpStock iOS 2.4.0

• Revised the login functionality to allow users to use multiple devices (Issue: 105)
• Resolved an issue where certain users were unable to upload item images (Issue: 110)
• Corrected an issue where external user configuration was causing an error upon logging in

 

Mobile Application Update - May 10th, 2021

JumpStock Android 1.11.0

• Fix for ‘Out of Memory’ error when loading large amounts of data

 

JumpStock iOS 2.2.0

• Improved usability of mobile scanning for receiving. Scanning a Jump barcode from the list of purchase orders will filter the list of purchase orders to only those with that item. If only one purchase order has that item on it, the application will automatically navigate to the purchase order details
• Fixed an intermittent issue where users were getting a ‘Database Locked’ error

 

JumpStock Update - April 29th, 2021

Enhancements

• Requisitions: Added support for Lawson Clinical Bridge
• Item Master Importer: Added support for additional pack string formats
• Item Master Importer: Now tracking the lowest unit of measure for items

 

Improvements

• PAR Administration: Removed ‘Delete All’ option
• Data Provisioning: Performance improvements

 

Fixes

• Pick Ticket Notifications: Fixed an issue where the incorrect location name was displayed in the email notification
• Usability: Disabled action buttons after first click to eliminate intermittent issue where some actions were duplicated in inadvertent double-click
• Order Create: Fixed an issue that was displaying incorrect results based on the supply source selected when searching for inventory while creating an order

 

 

Mobile Application Update - March 18th, 2021

JumpStock Android 1.10.4

• Improved usability of mobile scanning for receiving. 
• Scanning a Jump barcode from the list of purchase orders will filter the list of purchase orders to only those with that item. If only one purchase order has that item on it, the application will automatically navigate to the purchase order details
• Scanning a Jump barcode from within a selected purchase order will navigate to the receiving details screen for that item on a purchase order and default the quantity received to the quantity that was requested.
• Added note field to the manual pick ticket orders
• Corrected an issue where screen rotation lock was not working

 

Mobile Application Update - February 3rd, 2021

JumpStock iOS 2.1.1 

• Improved usability of mobile scanning for receiving. Scanning a Jump barcode will navigate to the receiving details screen for that item on a purchase order and default the quantity received to the quantity that was requested.
• Added note field to the manual pick ticket orders

 

InnerTrack Update - January 14th, 2021

Web Application

• Printing: Added support for the Brother RJ-3150ai printer 
• Item Shipping Detail Report: Fixed an issue with this report that was causing the Run Report button to be disabled 

 

Mobile Application Version 1.6.0

• Printing: Added support for the Brother RJ-3150ai printer

 

Mobile Application Update - December 18th, 2020

JumpStock Android 1.9.0 

• Added support for Zebra "touch computers", such as the Zebra TC52-HC
• Fixed an issue where the wrong location could be displayed when scanning multiple items
• Corrected an issue where some users were continually seeing the "Failed to Update provision due to: Provision update already in Progress" message 

 

JumpStock Release - December 17th, 2020

Improvements

• Item Master Importer Version 2.0 
  • Additional error messaging added to email notifications
  • Error Codes

CODE	DESCRIPTION
JT201	A user couldn't be found for the ID provided in the query string of the request.
JT202	Inventory couldn't be found for the SKU in the line of the file.
JT203	Inventory couldn't be found for the inventory ID that was found by SKU.
JT204	Updates completely or partially failed on this inventory record.
JT205	Updates completely or partially failed on this inventory record.
JT206	Couldn't update one or more of the item name, description, or image URL.
JT207	Couldn't update custom (item) number.
JT208	Couldn't update price or related data.
JT209	Couldn't update custom 1.
JT210	Couldn't update custom 2.
JT211	Couldn't update custom 3.
JT212	Couldn't update general ledger number.
JT213	Couldn't update category.
JT214	Couldn't update CDM code.
JT215	Couldn't audit the changes made to this inventory record.
JT216	Couldn't insert or update manufacturer information for this product.
JT217	Couldn't update item name (description).
JT218	Couldn't update description (long description).
JT219	Couldn't update image URL.
JT220	Couldn't reconcile changes to the units of measure.
JT221	Order unit of measure doesn't have a matching unit spec in the pack string.
JT222	Use unit of measure doesn't have a matching unit spec in the pack string.
JT223	The conversion factors for use and order units of measure don't divide evenly (use conversion factor into order conversion factor).
JT224	The unit of measure has conflicting conversion factors in the pack string.
JT225	The unit of measure has a conversion factor less than 1.
JT226	The pack string doesn't contain a unit of measure with a conversion factor of 1

Fixes

• 
  Fixed an issue with the Quick Add feature for manual orders was not displaying information for Custom Item Number, Bin Number, Reorder Unit of Measure, and Price
• Corrected an issue where incorrectly formatted image URLs were causing catalogs not to generate
• Fixed an issue with manual orders where searching for orders with hyphens was not producing the expected results

 

Mobile Application Update - October 21st, 2020

JumpStock iOS 2.1.0

• Fixed an issue with the the Receive Inventory module where searching by a purchase order was causing search progress indicator to remain on the screen (Issue: 1598)
• Added support for faster provisioning of inventory data (This will be rolled out incrementally to users over the next few weeks)
• Improved screen load time of items in the Create Order, Pull Inventory, Transfer Inventory, and Find Item modules

 

JumpStock Android 1.8.0 

• Fixed an issue with Create Order where scanning a barcode was not finding the item in inventory (Issue: 1600)

 

 

JumpStock Release - October 15th, 2020

Improvements

• Item Master Importer (Version 2.0 required): 
• Version 2.0 of the Item Master Importer feature now has the ability to update the cost of an item across locations with different units of measure. New ‘Pack String’ and ‘Lowest UOM Cost’ fields have been added to the Importer to allow for this conversion. All items in JumpStock will be updated with the current cost as long as the units used in JumpStock match the units passed in the ‘Pack String’ from the ERP system.
• The new Category and CDM Code fields can now be updated through the item master import process
• Email notifications added with row level error detail 
• Data Provisioning:  Increased performance of provisioning inventory data from the server to the mobile application (This will be rolled out incrementally to users over the next few weeks)
• Pick Tickets: Improved the reliability of Pick Ticket generation

 

 

Fixes

• Fixed an issue related to logging out of the new Current Inventory reports

 

 

 

Mobile Application Update - July 31st, 2020

JumpStock iOS only

• New blue color scheme
• Improved performance of data loading
• Fixed an issue when using the Custom Charge Code Pattern validation on Pull Inventory, the user was unable to clear out an invalid charge code and submit without backing out one screen and navigating back into Pull Inventory.  (Issue: 1545)
• Fixed an issue where Pull Inventory was displaying a warning about the inventory going negative for the item if a charge code was entered that is all numbers and that number is larger than the quantity on hand.  (Issue: 1546)
• Corrected an intermittent issue with the Create Order module that was allowing an order to be created with items from multiple requesting locations. This was possible if a location had items supplied by a vendor and an internal supply source. And, the items in the internal supply source are supplied by the same vendor as those vendor items in the requesting location.  (Issue: 1555)
• Added support for WebP image format. (Issue: 1574)

 

JumpStock Update - July 9th, 2020

Improvements

• Categorization:  A ‘Category’ field has been added to the PAR Level Administration screen to be used as a way to group like items together for searching, exporting, and future reporting functionality.
• PAR Uploader: Added support for the new ‘Category’ and ‘CDM Code’ fields. (The CDM Code field is reserved for future patient charging functionality)

 

Fixes

• Fixed an issue that was causing an orphaned order when item data was changed while another user was in the process of creating an order with that item. Validation has been added at the time of order creation to ensure underlying data has not changed. (Issue: 1584)

 

 

 

JumpStock Update - June 11th, 2020

Improvements

• Patient Charging Integration: The Chargeable flag on items is now passed in the Patient Charging interface with the EMR, allowing for integration logic to key off of whether or not a patient charge should occur.
• Manual Pick Tickets: Added the ability to search for items by Custom Item Number when creating manual pick tickets. This is in addition to the existing search by Item Number or Description.
• Pick Ticket History Export: An export from Pick Ticket History is now available. The export is a CSV format and includes the following data:

• Date Created
• Created By (user)
• Date Released
• Released By (user)
• Date Completed
• Completed By (user)
• Pick Ticket Number
• Pick Ticket Type (Auto or Manual)
• Requesting Location
• Supply Source
• Status (Completed or Deleted)
• Note
• Shelf Number
• Bin
• Item Number
• Custom Number
• Description
• Unit of Measure
• Quantity Needed
• Quantity Picked

 

Fixes

• Inventory Audit Report: Corrected the sorting in the Location drop-down to be ascending alpha-numeric. (Issue: 1590)
• Inventory Audit Detail Report:  Corrected the sorting in the Location drop-down to be ascending alpha-numeric. (Issue: 1590)
• Allocation Report: Fixed an issue where the ‘Days of Supply’ and ‘On Order’ headers were missing from the export of the Allocation Report. (Issue: 1589)
• Order History Report: Fixed an issue where the results, when filtered by a single Supply Source, would occasionally display additional orders from other Supply Sources. (Issue: 1588)

 

 

JumpStock Update - March 12th, 2020

Improvements

• Requisition Integrations: Updated the MEDITECH requisition interface to support 2Bin items. In certain configurations, the MEDITECH system does not allow two bins of the same item number to be ordered at the same time. We have updated the interface to combine orders for both bins into one line item.

Fixes

• Order History: Fixed an issue where pick ticket orders were not displaying in Order History when searched using a specific supply source, but were displaying when the supply source was set to ‘All’. This was happening when all items on the pick ticket had been deleted from the PAR location. These pick ticket orders now display in Order History. (Issue: 1473)
• Purchase Orders: Adjusted the application to not allow the use of decimals in the quantity field while editing a purchase order as it was causing an exception on the Edit Purchase Order screen. (Issue: 1558)
• PAR Uploader: Corrected an issue with the PAR Uploader where mapped columns with empty data fields were being ignored instead of clearing out the data field for that item in PAR Level Administration. (Issue: 1579)
• PAR Uploader: Fixed an issue with the PAR uploader when trying to update the Min PAR level and the PAR level in the same upload. The PAR level was not allowed to be updated below the current Min PAR level. The logic was changed to account for any adjustments to the Min PAR level in the upload file before attempting to update the PAR level. (Issue: 1580)
• Generate Labels: Improved the performance of the ‘Download CSV’ function within the Generate Labels page. (Issue: 1585)

• Auto Decrement: Previously, users with permissions to adjust inventory levels were prompted to choose between multiple options when docking the scanner, causing confusion and resulting in abandoned scans. The application now avoids that confusion by automatically performing an inventory decrement operation.
• Pending Items Prompt: The user will no longer be asked whether they would like to save pending items when a scan upload fails to complete. All pending items are now automatically saved to the Pending Uploads area. The user can then use the Manage screen to either upload or remove the pending items.
• Branding / Rename: The application has been renamed from JumpCart to JumpStock and colors and logos have been updated.
• Network Proxy Support: The application now supports network proxy authentication
• Roaming Profile Support: Support for Windows Roaming Profiles has been improved
• Reliability Enhancements: Scanner docking reliability has been greatly improved

 

 

JumpStock/InnerTrack Update - September 26th, 2019

 

Improvements

 

JumpStock

• Item Master Importer: Will no longer update Pack Count

 

InnerTrack

• System Performance: Improved system performance through enhanced error handling of email notifications

 

Fixes

 

JumpStock

• Fixed an issue where scans of a deleted 2Bin item were restricting all other scans in batch from uploading (Issue: 1557)
• Corrected the logic for triggering a below PAR event on partially picked pick tickets when received through the mobile application (Issue: 1563)
• Fixed an issue that was causing an item to be unlocked for ordering when the same item is deleted from a manual order (Issue: 1564)
• Ensured that order approver settings are always saving upon user profile update (Issue: 1566)
• Fixed an intermittent issue where customers created from the Super Customer administration screens were not displaying in the customer list (Issue: 1567)
• Removed deleted vendors from displaying in the export of all customers for a Super Customer account (Issue: 1568)
• Ensured that the Quantity Needed column displays in the 301 file interface for SAP expensing (Issue: 1569)

 

InnerTrack

• Fixed an issue where captured images during Stage and Deliver were not displaying when emailing the Package Status (Issue: 1472)
• Fixed an issue where the Freight Expense report was sometimes disabled  (Issue: 1541)
• Corrected the default display of the Subscription Start Date in the Account Admin screen for administrators (Issue: 1551)

 

 

JumpStock Release - August 15th, 2019

Features

• Password Security Configuration: Customers now have the ability to specify the password strength requirements for their users. The configuration parameters include a minimum number of characters and the ability to require uppercase letters, lowercase letters, digits, and special characters. (see KB article)
• 2Bin Pick Tickets: JumpStock now can be configured to auto-generate pick tickets for 2Bin items being supplied from an internal supply source location. Manual pick tickets are not supported for 2Bin items. (see KB article)
• MEDITECH Expense Integration: JumpStock now supports the creation of a MEDITECH expense file (Inventory routine) at the completion of a pick ticket.

 

Improvements

• Vendor Ship-To Maintenance: Improved the performance of saving changes to vendor ship-to configurations. (Issue: 1458)

 

Fixes

• Fixed an issue with Advanced Catalog where some .xls files were causing an error on file upload. (Issue: 1549)
• Corrected an issue with the PAR Uploader where Location and Supply Source was required in the upload file. User can now use the Select Location and Select Supply Source drop-down options in conjunction with the upload file. (Issue: 1550)
• Fixed an issue where items were hidden on the Inventory Maintenance page when submitted as a manual order requiring an approval. (Issue: 1552)
• Fixed an issue that was resulting in ‘null’ being printed on labels when populated using the Upload File feature in the Generate Labels page. (Issue: 1553)
• Fixed an issue where alternate barcodes for an item were missing on the Barcode Maintenance page if the item was deleted from one location. (Issue: 1554)
• Fixed an issue where items were showing up on more than one auto-generated order. This occurred when an item was fully received on a prior purchase order that remained open waiting on one or more other items. Once all the remaining items were received, all items on that PO were made available for ordering regardless of them being on a new order. (Issue: 1559)
• Ensured that the Process Requisition link on the Order Summary page is disabled after first click to eliminate the possibility of a second requisition file creation. (Issue: 1560)

 

 

JumpStock Release - May 16th, 2019

Features

• ERP Item Master Importer: The purpose of the Item Master Importer is to provide an automated way of getting ERP item information into JumpStock without having to manually maintain that data in two systems. More specifically, keeping the pricing information current is critical to the accuracy of many JumpStock reports and calculators.

 

Improvements

• Manual Pick Tickets: Enhanced the manual pick ticket creation dialog to restrict the user from adding an item to the pick ticket while loading items for a different location or supply source
• Creating and Updating Items: Added functionality to trim leading and trailing spaces on the bin number field when creating or updating an item (Issue: 1544)
• Super Customer Reports: Increased the limit of the number of locations displayed in the search criteria for super customer reports (Issue: 1424)
• Custom Charge Code Pattern: Modified the logic of the charge code validation to restrict an item from decrementing inventory if the defined pattern is not met for scanned charge codes

 

Fixes

• Corrected an issue to remove the order placed state on an item when the purchase order is edited to receive less than the initial quantity (Issue: 1485)
• Fixed an issue where printing labels from a purchase order was not auto-populating the Generate Labels page with the correct location and supply source (Issue: 1422)
• Adjusted the date/time display on pick tickets and their associate purchase order to use the same time standard (Issue: 1543)
• Fixed an issue where pull inventory items without a charge code were not displaying on the Usage by Location report when using the Custom Charge Code Pattern setting  (Issue: 1539)
• Updated the Super Customer Current Inventory report to not include items from removed customers (Issue: 1538)
• Fixed an issue where in some cases the calculations on the Order History report were not matching the export of the report (Issue: 1547)
• Fixed an issue on the Inventory Maintenance page where the quantity on order was incorrect for dynamic items (Issue: 1548)
• Corrected an issue with manual order creation where some items could not be found when using the Quick Add feature (Issue: 1501)

 

 

JumpStock/InnerTrack Release - March 14th, 2019

Features

• Last Order Date (Mobile App Update): In the Take Inventory module on the mobile application, we have added the last order date on the item detail screen. This date represents the last time a JumpStock PO was created for the item. Note: Since JumpStock was designed to generate orders automatically based on PAR levels, it is not recommended to make ordering decisions based on this date.

 

 

Improvements

 

JumpStock

• Improved search performance for the following reports:
  • Usage by Charge Code

  • Inventory Audit

•  

   Improved searching of grouped POs in the Order History report by producing all sub-purchase orders when searching with the group purchase order (Issue: 1481)

 

InnerTrack

• (Mobile) Improved the ability to scan barcodes on DK1204 labels (Issue: 1441)
• Added the ability to insert custom text from Research Package (Issue: 1456)

 

 

Fixes

 

JumpStock

• (Mobile) Fixed an issue with the mobile application where some users were unable to add more than one item to a manual pick ticket (Issue: 1466)
• Fixed an issue where some accounts were unable to create users (Issue: 1486)
• Fixed an issue where pick ticket notes were not saving (Issue: 1487)
• Exporting of labels now includes Lot information (Issue: 1509)
• Fixed an intermittent error message when navigating to Pick Tickets (Issue: 1475)
• Fixed a sorting issue on the Bin column located on the New Order page (Issue: 1497)

 

InnerTrack

• (Mobile) Corrected an issue where a label was allowed to be printed with zero quantity received using blind receiving (Issue: 1442)
• (Mobile) Fixed an issue where duplicate 856 messages were being created on a fully verified purchase order (Issue: 1482)
• Fixed an issue with printing labels that sometimes was truncating text instead of wrapping (Issue: 1510)
• Adjusted the Package Tracking web page to only return one record when searching by Requisition number (Issue: 1452)
• Fixed an issue where not all labels were printing for a multi-destination purchase order (Issue: 1463)

 

Mobile Application Update

 

JumpStock

• Changes to support the features and fixes noted above
• iOS version 1.7.9 and Android version 1.7.9
• Made available available Friday, February 15th

 

InnerTrack

• Changes to support the improvements and fixes noted above
• iOS version 1.5.1
• Made available available Friday, March 15th

 

 

JumpStock Release - January 17th, 2019

Features

• Release and Print (Pick Tickets): Added the ability to release and print one or more pick tickets with one action from the Pick Tickets and the Pick Ticket Detail pages
• Minimum PAR and Reorder Quantity Level: Added the ability to set a minimum PAR or Reorder Quantity Level per item. This will prevent users from inadvertently adjusting the PAR or Reorder Quantity below that amount.

 

Improvements

• Pick Ticket Summary:
• Updated the name of this page to Pick Tickets to match menu
• Moved the Pick Ticket History tab to a ‘History’ link in the upper right corner of the same page
• Removed Case # search criteria field
• Removed Case #, Procedure Code, and Case Date columns from results grid
• Pick Tickets: Added Date Released and Released By information to search results, details, and pick ticket printout
• Pick Ticket Printout: Updated the header layout and included the pick ticket number at the top of the grid on each page to assist with pick ticket identification for multiple page printouts

Fixes

• Fixed an issue where PAR level attributes were unable to be updated when an internally supplied item did not have Bin Number (Issue: 1474)
• Fixed an issue with Auto Pick tickets where a zero-picked item was generating a new pick ticket even if the inventory went above PAR (Issue: 1476)
• Fixed an issue that was causing pick tickets to not appear in Pick Ticket History when it contained one or more items that have been deleted from that PAR location (Issue: 1477)

 

 

 

 

JumpStock Release - December 13th, 2018

Fixes

• Corrected an issue with the Inventory Audit and Inventory Audit Detail reports where leading zeros were being trimmed on export (Issue: 1464)
• Fixed an issue where the bin number of an item was allowed to be deleted on a fixed order or purchase order (Issue: 1465)
• Fixed an issue with the PAR uploader where similarly named items were not being recognized as separate items (Issue: 1454)
• Pick Tickets
• Fixed an issue where auto pick tickets were not being updated or created for items received that remained under PAR (Issue: 1471)
• Fixed an issue that was causing multiple auto pick tickets for the same location based on the frequency of item scans (Issue: 1468)
• Corrected the status of a reset pick ticket to be set back to Released instead of Open (Issue: 1468)
• Combined items that were zero-picked with existing auto pick ticket for the same location instead of generating its own pick ticket (Issue: 1468)

 

 

JumpStock Release - December 3rd, 2018

Features

• System Messages: Jump has added the ability to display messages to users of upcoming server maintenance, recently released features or other important notifications. These messages will display in the site header and can be dismissed by the user.

Improvements

• Pick Ticket Summary: Performance on the page has been substantially improved to yield faster load times. System generated pick tickets now are designated a pick ticket number from its origin in an Open status but will continue to be automatically updated until Released. Read about pick tickets here.
• Purchase Order Summary: Added the ability to search for purchase orders that contain a specific item number.
• Inventory Audit Report: Improved performance

 

 

 

 

 

InnerTrack Mobile Release- November 28th, 2018

 

Android (1.7.8)

• Improvements
  
  • Photo Quality: Improved photo quality by decreasing the level of compression
  • Photo Sizes: Added 1000px (pixel) photo option as the default setting 

iOS (1.5.0)

• Improvements
  • Photo Quality: Improved photo quality by decreasing the level of compression 
  • Photo Sizes: Added 1000px (pixel) photo option as the default setting 

 

 

 

InnerTrack Release - November 15th, 2018

Improvements

• Photo Quality: Added the ability to use 1000px (pixel) photos for Stage and Deliver
• Improved the usability of interacting with photos and display of data in the following areas:
• Package Status Reports
• Package Status Emails
• Customer Package Tracking Portal
• Online Help: Updated the Support link to point to the new knowledge base

 

JumpStock Release - October 22nd, 2018

Features

• The PAR Calculator and 2Bin Reorder Quantity Calculator reports now include the ability to see stock-outs per item.
• The ability to restrict charge codes from being submitted when the scanned code does not meet the expected format.

Improvements

• Upgraded the Purchase Order Summary page. Performance on the page has been substantially improved to yield faster load times. In addition, users now have more control over searching for purchase orders. This includes searching by location, supply source, date range, status, and more. The new Purchase Order Summary page will no longer auto-load all open purchase orders. You will have the ability to set your search criteria prior to searching the system. 
  • Link to help article that covers changes to PO Summary page can  be found here
• Performance improvement to the PAR Level Administration page and the Add PAR Items dialogue.
• Updates to the SAP pick ticket integration to include non-picked items and the original quantity needed (ordered).
• New configuration added to remove restrictions on how patient charges are sent.

Fixes

• A correction to Inventory Valuations report was made to account for items that exist in inventory, but were not incremented or decremented in the selected date range. (Issue: SUP-40)
• Updated the message for managing pop-up blocking. (Issue:1436)
• Fixed an issue where the Order History report was displaying information one day beyond the selected data range (Issue: 1439)

 

 

 

JumpStock Release - September 18th, 2018:

 

Features

• Item Catalog Beta - The item catalog feature will allow Jump’s customers the ability to manage item information automatically with a companion ERP system’s Item Master data or manually through new Item Catalog Maintenance screens for those who currently do not use an ERP system. This feature is currently only available to beta customers.

Improvements

• Location Maintenance - update to allow the use of special character (+) in location name

• Performance Improvements - various tweaks to optimize overall performance and targeted changes to Pick Ticket Summary, Purchase Order Summary, and PAR Level Administration

• Pick tickets - printing of pick tickets now honors on-screen sorting

• Pick tickets - printing closed pick tickets now includes Quantity Picked

• Addition of a session timeout warning

Fixes

• Pick tickets - fixed an issue where some manually generated pick tickets were displaying previously picked items when printed

• Pick tickets - fixed an issue with creating single item pick ticket with a static reorder type

• User Maintenance - fixed an issue where a user could not be deleted if they were assigned as an order approver

• Cart Sorting - fixed an infinite spinner issue with sorting columns on the Cart tab when viewing an order from Order Summary

• Label printing - fixed an issue where the incorrect supply source was printing on generated labels